Are you considering installing a Teco Air conditioner? Read more about them here.
Teco Platinum 3D Series Airconditioning – Cool Only Split Systems
Introducing TECO’s latest and most efficient range of Cool Only DC inverter split systems. Engineered to perform some of the harshest Australian conditions, the Platinum 3D range is a smart choice when designing for energy reductions. Registered and approved under the latest determination of the Minimum Energy Performance standards, the Platinum 3D is an affordable option for clients on any built, requiring high efficiency wall hung split systems.
Exceptional Energy Efficiency:
Offering outstanding energy efficiency with up to 8.5 star rating*. The higher the star rating, the more it helps to keep running costs down.
3D Air Flow.
Combines vertical and horizontal auto swing to ensure an even distribution of conditioned air throughout the room.
4 Way Auto Swing.
Cleverly designed to evenly distribute conditioned air. This helps warm up or cool down faster, evenly and continuously.
R32 is a next generation refrigerant, not only does it enhance performance by carrying heat, it also has no impact on ozone depletion and minimises Global-Warming Potential (GWP) compared to traditional refrigerants.
The built-in Wi-Fi enables you to control the air conditioner from anywhere using your mobile phone or tablet. Download our App for your smart device and control your indoor unit remotely either in or out of home. Compatible with popular smart speakers (Google & Alexa).
Gold Fin Protection.
Gold Fin Protection aids in reducing corrosive effects on outdoor coils and preserves heat exchange capacity for longer. Gold Fin also promotes the effectiveness of the Self Clean function on indoor evaporator coils.
In-built diagnostics, easily accessible panels and detection system ensures each unit is easy to maintain and service.
The indoor unit remembers the last angle you had the louvre set at so you don’t have to re-select each time you start the unit.
I Feel Mode
When you select this function, the room temperature sensor built in to the remote controller is activated, replacing the one in the indoor unit. The air conditioner will regulate the room temperature based on the temperature around the remote controller, just as if the air conditioner is following you.
ECO mode is an energy-efficient setting that works in cooling mode by reducing the fan speed to minimum and adjusting the outdoor frequency. This mode helps reduce running costs.
Interactive Digital Display
Information is displayed on the front panel of wall hung split units, such as function confirmation and set temperature.
Pressing this button on the remote control activates the quiet function, lowering the fan speed to a gentle breeze inside as well as reducing the compressor running frequency outside.
Our outdoor unti is fitted with a Deman Response Enabling Device Connection (RJ45) ensuring you can elect to participate in electricity providers promotional programs where they cap demand for electricity. (Currently only on offer in Queensland).
Have your unit switch on or off after a period of time you set. Great for switching unit on automatically before you get home or switch off automatically after you got to bed.
The operation mode, set temperature, and the fan speed you have selected are memorised by the indoor control PCB. The AUTO RESTART function sets to work restoring your settings the moment power has been restored after a power failure.
Turbo Fan Mode
With this function, the air conditioner will maximise the output of cooling capacity, making the room cool down rapidly to attain the
desired temperature in the shortest time.
Long Distance Air Flow
With a powerful selection of fan speeds and 3D air flow, ensures an even and thorough air flow coverage within the room.
Refrigerant Leak Detection
Detects refrigerant leakage in cooling mode monitoring the temperature reduction at the indoor evaporator when unit is switched on. This protects the compressor in case of a refrigerant leak or blockage.
High Density Filter
Unwanted particles of dust and pollen are trapped because our high density filters have 40% more holes per square centimeter: which gives you higher filtration in the room.
High voltage statically charged filter. Dust and airborne particles less than 2.5 micrometres are absorbed. This process purifies the air passing through the air conditioner. Helping you breath easier.
This mode is specifically designed to create a comfortable environment for sleep as it slowly increases or decreases the set temperature. This is done over the period of several hours until it eventually returns to the original set temperature. This mode assists in reducing running costs while maintaining a comfortable temperature while you sleep.
Clean Indoor Self Cleaning
This advanced feature captures the dust and dirt on the indoor coil by rapidly cooling then defrosting. This process flushes away unwanted contaminates. The air conditioner runs through a drying cycle to complete the cleaning process.
Minimum Energy Performance Standards (MEPS)
The spectacular Platinum 3D range is the latest and most efficient range of DC inverter split systems that TECO have to offer. Engineered to perform in some of the harshest Australian conditions, the Platinum 3D range is a smart choice when designing for energy reductions at an affordable price.
Registered and approved under the latest determination of the Minimum Energy Performance standards, the Platinum 3D range offers high
efficiency compared to other TECO models, regardless of the climate zone you reside in. The new energy efficiency label guides you, based on
HOT, AVERAGE AND COLD Zones, giving you peace of mind that TECO is a comfortable choice. For more information regarding this new labelling
system, please visit www.energyrating.gov.au.
Check out the efficiency of our new Cool Only units below.
If you have any questions regarding the TECO Split System Air conditions please contact our friendly team on 1300 325 742.